|
|
Post by killahog on Nov 10, 2008 12:54:09 GMT -5
I found a original savage 10ml for sale that uses the savage model 12 action. my question is how does the Ignition system work? and are there any replacement parts avalible such as vent liners if they use them or aftermarket breech plugs?
|
|
|
|
Post by realhunter on Nov 11, 2008 9:37:14 GMT -5
both the modules and the vent liners are still available from savage
|
|
|
|
Post by killahog on Nov 11, 2008 11:09:07 GMT -5
Thanks real hunter. I just found out that the price on the original 10ml is 700.00$. That seems like it is a little to much I think I am going to order a pac nor 45 for my current 10ml.
|
|
|
|
Post by mike3132 on Nov 11, 2008 11:12:09 GMT -5
Modules are $10.00 each and ventliners were $3.00 each the last I bought. No breechplugs available. $700.00 is very pricey for that gun unless its got a very good quality scope with it. Mike
|
|
|
|
Post by killahog on Nov 11, 2008 11:33:42 GMT -5
Thats what I was thinking its a rare gun but in reality all I would use is the action the trigger, that is a sharpshooter trigger. and The breechplug. I am not a fan of the savage tupperware stocks.
|
|
|
|
Post by mike3132 on Nov 11, 2008 15:07:49 GMT -5
The original ML I and the ML II both use model 10 short actions. The ML I has locking lugs and uses modules that fit into the breech plug. Any after market trigger made for a Savage will work in the ML I and ML II pre-accutrigger.
ML I are not that rare. Not long ago there was a new one for sale for 450.00. Mike
|
|
|
|
Post by tar12 on Nov 11, 2008 15:41:33 GMT -5
The original ML I and the ML II both use model 10 short actions. The ML I has locking lugs and uses modules that fit into the breech plug. Any after market trigger made for a Savage will work in the ML I and ML II pre-accutrigger. ML I are not that rare. Not long ago there was a new one for sale for 450.00. Mike There was a guy on either AuctionArms or Gunbroker that had 10 NIB ML!s about 3-4 months ago... |
|
|
|
Post by killahog on Nov 11, 2008 16:15:09 GMT -5
I thought they were few and far between this is the first one I have seen for sale. Thanks for the replys.
|
|
|
|
Post by rossman40 on Nov 12, 2008 0:31:25 GMT -5
Technically, I hate to say it, it is like one of those RW answers. Model 10s are blue and Model 12s are stainless. Another thing are we talking about a factory ML10-I in stainless, a pre-accutrigger ML10-II or one of Henry's custom built rifles? I have never seen a SS ML10-I, I thought they were all blue. If it was a factory made ML10 the serial number will start with a "M", if it is a custom built on a centerfire action it may start with a "F".
|
|
|
|
Post by killahog on Nov 12, 2008 7:57:26 GMT -5
rossman the gun is blued with a black stock and the SN starts with an M. I was told that fred at sharpshooters installed the aftermarket trigger.
|
|
|
|
Post by realhunter on Nov 12, 2008 8:24:14 GMT -5
The original ML I and the ML II both use model 10 short actions. The ML I has locking lugs and uses modules that fit into the breech plug. Any after market trigger made for a Savage will work in the ML I and ML II pre-accutrigger. ML I are not that rare. Not long ago there was a new one for sale for 450.00. Mike There was a guy on either AuctionArms or Gunbroker that had 10 NIB ML!s about 3-4 months ago... I purchased that one.... |
|
|
|
Post by rossman40 on Nov 12, 2008 9:48:03 GMT -5
A ML10-I with just an aftermarket trigger sure isn't worth $700. You can buy a NIB -II SS laminated thumbhole and come out with more gun for less.
|
|
