|
|
Post by GW on Jun 28, 2004 9:12:48 GMT -5
Hi,
Has anybody had any luck (good or bad) with conetol rings and bases on MLII?
Can a person get buy with low rings with 1X4--20mm?
Thanks,
Gary
|
|
|
|
Post by RBinAR on Jun 28, 2004 12:15:08 GMT -5
 I have no trouble recommending these bases and rings. But I will advise you to call them first and let them know what scope you plan to use and what type of reciever is on your Savage (they have an 800 number). Just go to the web site for info. I have a 2X7 Leupold compact that mounts easily with thier lowest rings but I'm afraid I don't know how that compares with the scope you mention. Remember to get it right they have to know the measurements between the screws and if you have the round or flat reciever so have that stuff ready if you call. They can tell you if the scope can use the lowest rings.
|
|
|
|
Post by grantman on Jun 28, 2004 21:46:00 GMT -5
I used the Control low bases and rings to mount a 1&1/2x5x20mm Leupold on a Heym. The low bases are REALLY low. Works perfect with a 20mm objective, but would be problematic with anything bigger. IMO Conetrol and S&K have the best mounts. Having said that, I use Warne quick detach on all of my muzzleloaders. Grantman
|
|
I have no trouble recommending these bases and rings. But I will advise you to call them first and let them know what scope you plan to use and what type of reciever is on your Savage (they have an 800 number). Just go to the web site for info.