|
|
Post by Savage Buff on Jun 28, 2004 11:43:22 GMT -5
 Ever since I shifted to the 3 hole vent liner, I lost all accuracy. When I used the single hole liner, I was getting good groupings with a 260gr Speer and a Knight black sabot behind 3.4cc worth of 5744. Now I am testing the 250gr SST with the smaller MMP sabot and 3.1cc of 5744. Groupings are like 8 inches. Sometimes, I don't even hit the target. Using a subbase brings it down to 6 inches! Cooling time is 10 minutes. What gives?! Suggestions would greatly be appreciated. Thanks Buff (I couldn't post with my "Buff", so I had to use "Savage Buff" - how can I fix it?)
|
|
|
|
Post by edge on Jun 28, 2004 11:56:01 GMT -5
Ever since I shifted to the 3 hole vent liner, I lost all accuracy. SNIP Buff (I couldn't post with my "Buff", so I had to use "Savage Buff" - how can I fix it?) First go back to the ONE HOLE LINER and verify that your accuracy is OK ( just to make sure that the scope or something else is not the problem). Make sure that ALL of your components are identical. You MAY have a finiky load that only likes the One Hole or you may need to adjust the powder charge up or down. If you are NOT logged on then you cannot use your username! This is just a guess, but you will know because it will ask for your name. edge. |
|
