|
Post by Swede on Nov 4, 2008 8:23:52 GMT -5
Doing some target shooting the othe day, the plastic on the left rail came loose.
It looks like Parker used a double sided adhesive tape to hold the plastic in place.
After each shot the plastic would shift to the right. Covering the slot in the stock.
Any suggestions to remedy this problem are welcome.
I have not been able to get out deer hunting this season due to a auto accident a couple months back. But with the rut get ready to commence I am itching to get out a few evenings.
|
|
|
Post by digginparkers on Nov 4, 2008 11:20:25 GMT -5
HAve you reached out for Parker yet to tell them what's going on with the bow?
That would be my next move, they are a real good group, I had call them on my compound and they were real helpful.
Phone - 540.337.5426
|
|
|
Post by SW on Nov 4, 2008 20:20:27 GMT -5
:)Swede, I had a 150# Safari Mag (my son took it over) and a 175# Safari Mag(I'm keeping it!!). Both x-bows had this problem. I also had problems with both having the front large bolt work out. All is fixed now. I used epoxy to retain the plastic piece on each. Used Locktite for the bolts. No problem in hundreds of shots since.
|
|
|
Post by Swede on Nov 5, 2008 7:19:26 GMT -5
Thanks to diggin'p and SW.
I had thought of the epoxy fix, but was not sure how it would hold up. I will place a call to Parker.
|
|