Need help fixing a broken rack

[RAF]

Here's the story. Last summer my daughter moved home. Temporary?? Anyway, along with all her belongings came 2 20lb cats. In order to make room for her and belongs, I took 2 racks and fastened them to the wall in the laundry room with 3 inch screws into 3/4 inch wood wall board. Now, on several occasions, I've seen those cat sitting in a basement window next to where the racks were hanging. I have also had to straighen the racks out when I found them cockeyed. The other night heard a crash. Daughter said the racks fell off the wall. Said the cats were inocent. Took a look and it was obvious the screws were ripped out of the wall and the scull bone of one of the racks was broken in half. Any idea how to stick them back together. The break is a clean one and tried some crazy glue, but that didn't work. This was a 150 buck and fortunetely the bigger one is OK, so far. Am including some pictures to show what I mean.

[Tenbears]

No Problem. This is a two part fix though.
Cut a piece of plywood the size of the skull plate. With the skull in its original position. drill a hole in the skull at the base of each antler. Now get some auto body filler. Mix in the hardener, Pile a generous gob on the plywood and press the skull into it wile holding the skull in its original position. and hold till dry. It will only tale a few minuets. This will give you a fitted base for the skull. Then run a screw through the holes, and into the plywood. trim off any excess body filler with a sharp knife.
Next Shoot the cats wrap them in plastic bags freeze them solid. Then mail them to me. I will mount them in a sleeping pose. and return. Your daughter will still have her cats. but they will cause no more damage, and she won't have to clean litter boxes any more. LO

[RAF]

Tenbears. Thanks. I'll give a go. Incidently, I like the first 4 words of your advise about the cats. However, that would have me in hot water in this house.