|
Post by jjw on Oct 13, 2006 13:50:51 GMT -5
|
|
|
Post by clintsfolly on Oct 13, 2006 14:56:53 GMT -5
the best advice i can give is go with rcbs will last longer an do better job easier towork with. clint
|
|
|
Post by RAF on Oct 14, 2006 8:55:56 GMT -5
When I started hand loading had the same kit. It's was OK and I still use some of the pieces, the powder measure and the priming tool. I them upgraded my press to an RCBS and that was a noticable improvement. You have to ask yourself how much loading are you going to do. This kit will be adequate if you're not doing much, but if you get serious, go with the RCBS at least.
|
|