|
Post by Blue-Dot-37.5 on Oct 25, 2006 18:25:50 GMT -5
Was delivered today. Awsome program!
I plugged in the #'s for a 25 WSSM shortened .045" (neck only) and bumped up to .358" (35 cal)
2200 to 2600 fps with a 180 gr. Barnes "X" bullet.
If I shorten a .416 Rigby and neck it down to .358" I can push a bullet even faster.
That should do the trick on whitetails out to 300 Yds!
Now for Indiana to pass the law. Then it's time to start ordering parts for the new gun. ;D
|
|
|
Post by callemup on Nov 1, 2006 17:53:51 GMT -5
I need a load for my Ruger 270 Stainless. Can't group it for crap..... Usually 270's are lethal... I'll get though, it is new. Might need some break in shots through it.
|
|
|
Post by Rifleman on Nov 6, 2006 6:02:50 GMT -5
callemup the problem might be the barrel on the Ruger not the loads. I have had problems with getting good accuracy from Stainless Ruger barrels in the past. Just a thought.
|
|
|
Post by bubba on Nov 6, 2006 9:21:46 GMT -5
IMR4350 worked in mine........
|
|